Precision Bearing and Shaft Assemblies for Industrial Linear Motion
Get factory-direct pricing on matched bearing and shaft sets. OEM/ODM ready. Ships worldwide.
Quick Navigation
Why Bearing and Shaft Procurement Often Goes Wrong
Sourcing the right bearing and shaft combination isn't straightforward. I've seen purchasing managers chase low quotes only to deal with premature failures down the line. Mismatched tolerances lead to vibration issues, especially in high-speed linear motion setups. One importer from Texas told me last year how a cheap set from an unverified supplier seized up after 3 months, costing them a full machine rebuild.
Common pitfalls hit hard. Overlooking shaft hardness specs against bearing inner rings causes brinelling. Ignoring preload requirements in angular contact bearings results in skidding under load. And don't get me started on logistics delays—containers stuck in customs because of missing RoHS declarations. These aren't rare; they're daily headaches for ops teams relying on cross-border supply.
Risk multiplies with generics. Off-the-shelf bearings might fit dimensionally but fail under your specific radial or axial loads. Shaft surface finish matters too—Ra values above 0.4μm chew through bearing life fast. Procurement directors know the drill: balancing cost, quality, and delivery without getting burned.
We've handled inquiries from 50+ countries where buyers overlooked OEM traceability. No batch numbers, no failure analysis. That's where real suppliers shine—full documentation from grind to pack.
Operations managers tell us they waste weeks testing samples. Better to partner with a factory that understands your CNC router, automation arm, or conveyor application from the start.
YIDI's Precision Bearing and Shaft Assemblies: Built for Reliability
At YIDI Motion, we specialize in matched bearing and shaft sets for linear motion systems. Think ball screw drives, linear guides, and actuators where precision alignment is non-negotiable. Our bearings—deep groove, angular contact, or crossed roller—come pre-paired with ground shafts to ABEC-7/P4 tolerances or better.
Shafts are induction hardened, chrome-plated where needed, with diameters from 8mm to 80mm. Bearings use high-grade chrome steel or stainless for corrosive environments. We don't sell shelf stock; every set is application-tuned. For a packaging machine in Germany, we adjusted shaft straightness to 5μm/300mm, cutting runout by half.
What sets us apart? Integrated solutions. Pair our bearings with our ball splines or linear modules for one-stop procurement. No more juggling multiple vendors. Export manager here—I've packed thousands of these into 20ft containers without a single damage claim.
Buyers appreciate the OEM/ODM flexibility. Custom shaft keyways? Non-standard bearing cages? We handle it in-house. Lead times beat most: 15-25 days for standards, 30-45 for customs.
- Load Handling: Radial up to 50kN, axial to 30kN depending on series.
- Speeds: 10,000 RPM continuous in grease-lubed setups.
- Life Expectancy: L10h over 20,000 hours typical under rated loads.
- Materials: GCr15 bearing steel, 40Cr or 42CrMo shafts.
Procurement teams like yours save on testing. We provide FEA simulations upfront, proving the pair works before you order.
Inside YIDI Motion: 100+ Staff, German/Japanese Tech
Established in 2020, Hebei YIDI Import & Export Trading Co., Ltd. runs a dedicated factory in Shijiazhuang, China. Over 100 employees, 30% senior technicians. We import grinders from DMG Mori and Okuma, plus Zeiss CMMs for inspection. No outsourcing—shafts are turned, heat-treated, and superfinished here.
Annual output? Tens of thousands of bearing-shaft units. Exports to USA, Germany, Japan, Canada—name it. Our linear motion focus means we know bearing-shaft dynamics cold. Preload testing on every batch, dynamic balance for high-speed shafts.
Certifications back it up: ISO 9001:2015, CE marking, RoHS compliant. For US buyers, we prep UL options. Traceability from billet to box via ERP system.
Factory tours welcome via video call. See the chrome plating line or bearing assembly cleanroom yourself. Procurement advisors recommend this—cuts supplier doubt instantly.
Operational Note: Our Japan-sourced lapping machines hold shaft cylindricity at 2μm, reducing bearing wear 30-40% vs. standard grinding.
Contact: +86 18134111662 | adam@yidimotion.com | 16-1-1601 Aobeigongyuan, Chang'an District, Shijiazhuang, Hebei, China.
Bearing and Shaft Technical Specs Table
| Series | Shaft Dia (mm) | Bearing ID/OD (mm) | Dyn Load (kN) | Max Speed (RPM) |
|---|---|---|---|---|
| Deep Groove 6000 | 10-50 | 10x26 / 50x110 | 4-45 | 12,000-20,000 |
| Angular Contact 7000 | 15-60 | 15x28 / 55x120 | 10-60 | 10,000-18,000 |
| Crossed Roller RU | 20-80 | 20x35 / 90x145 | 15-80 | 5,000-12,000 |
Note: Custom specs available. Tolerances h6/g6 shafts, P5/P4 bearings standard.
shaft and bearing bearing shaft shaft bearing
Where Bearing and Shaft Sets Excel
CNC machines. Shaft spins true, bearing handles thrust without chatter. Automation robots—lightweight pairs for arm joints. Packaging lines: high-cycle radial loads. We've supplied shaft-bearing kits for solar panel trackers enduring wind gusts.
Harsh spots too. Stainless shafts with sealed bearings for food processing. Or ceramic hybrids for ultra-high vacuums. Importers to USA often spec these for semiconductor wafer stages.
One caveat: Match moments of inertia in multi-axis setups. We've tweaked dozens for that.
Practical Installation and Maintenance
Heat bearings to 80°C for press-fit. Use induction heater, not torch—avoids microstructure damage. Align shaft runout under 10μm total indicator. Torque locknuts per spec; over-tighten and preload spikes.
Lube matters. Grease every 500 hours or switch to oil mist for speeds over 15kRPM. Watch for fretting at shaft shoulders—chamfer edges 0.5-1mm. Common mistake: ignoring housing bore tolerances, leading to edge loading.
Maintenance? Vibration analysis quarterly. Replace at L10 life or if noise rises. We've cut downtime 20% for clients with our predictive kits.
- Shaft cleaning: Ultrasonic before assembly.
- Bearing storage: Vertical, sealed.
- Failure signs: Spalling from poor lube.
Shipping from China: Realistic Timelines
EXW Shijiazhuang or FOB Tianjin. Air for samples (3-7 days DHL), sea for volume (25-35 days to LA/Long Beach). 1x40HQ holds 5,000+ units foam-packed.
Incoterms flexible—DDP to USA door for small lots. Duties? We classify HS 8482.10 bearings, 8483.10 shafts. No hidden fees.
Pro tip: Consolidate with our linear guides for full container rates.
Feedback from Procurement Pros
Mike R., Ops Manager, Texas CNC Shop: "Matched tolerances saved us alignment headaches. Delivered 18 days post-order. Will reorder."
Anna K., Buyer, German Automation Firm: "P4 bearings on 40mm shafts held spec under 25kN load. RoHS docs perfect for EU."
John L., Supply Chain, Canadian Robot Maker: "OEM custom keyway done right. Lead time beat SKF quote by 2 weeks."
Carlos M., Importer, Mexico Packaging: "High-speed set cut vibration. Samples free—smart move."
Frequently Asked Questions
Q: What's the MOQ for custom bearing and shaft?
A: 10 sets for standards, 50 for full custom. Samples single-unit ok.
Q: Do you match competitor specs like NSK or THK?
A: Yes, reverse-engineer if needed. Our P4 equals their P4.
Q: Payment terms?
A: 30% TT advance, balance B/L copy. LC for big orders.
Q: Can I get CAD models?
A: STEP/IGES files free post-inquiry.
Q: Warranty?
A: 12 months or 5,000 hours. Returns handled fast.
Ready for Your Bearing and Shaft Quote?
Request specs, samples, or factory pricing. Response in 24 hours.
HEBEI YIDI IMPORT AND EXPORT TRADING CO.,LTD. | +86 18134111662 | adam@yidimotion.com
