Understanding the 6202 2RS Bearing: A Procurement Essential

Procurement managers know the drill. You're sourcing components for machinery that can't afford downtime. A faulty bearing leads to vibration, heat buildup, and eventual failure. Enter the 6202 2RS bearing – a workhorse in deep groove ball bearings that's been reliable for decades in motors, pumps, and conveyor systems.

This isn't just any bearing. The "6202" designates its dimensions: 15mm inner diameter, 35mm outer, 11mm width. The "2RS" means double rubber seals on both sides, keeping grease in and contaminants out. We've shipped thousands to US importers over the years, and they keep coming back because it handles real-world abuse – dust in warehouses, moisture in washdown environments, speeds up to 14,000 RPM.

At YIDI Motion, we've been machining these since 2020 from our Hebei factory. Not some reseller markup. Direct from production lines equipped with German and Japanese grinders for precision tolerances. Why does this matter? Loose tolerances mean premature wear. Ours hit ABEC-3P standards consistently, with radial clearance C3 options for high-speed fits.

Think about your last bearing failure. Was it seal blowout? Improper grease migration? The 2RS design uses nitrile rubber seals that flex without cracking under load. We've seen ops managers swap these into electric motors and cut maintenance calls by noticeable margins. No hype – just field reports from repeat buyers in automotive aftermarket and ag equipment.

Markets shift, but demand for 6202 2RS stays steady. US distributors stock them for HVAC fans, power tools, even skateboard trucks. Cross-border trade? We handle it. From Shijiazhuang to your warehouse in 2-4 weeks via sea or air. Containers load efficiently – 50,000 units per 20ft without damage.

Buyers often overlook material specs. Ours use GCr15 chrome steel, heat-treated to 58-62 HRC. Cage is stamped steel for durability. No cheap alternatives that brinell under thrust loads. And for those OEM runs, we do custom chrome plating or stainless variants, though standard carbon steel covers 90% of needs.

Search "6202 2RS bearing" and you'll see generic listings. But dig deeper – check load ratings. Dynamic load Cr at 7.72 kN, static Cor 3.6 kN. That's per SKF baselines, matched in our production. We've tested batches in-house on vibration stands, holding under 0.08g at 10,000 RPM.

Procurement tip: Always verify seal integrity on arrival. Press the rubber – it should rebound firmly. We've had importers catch bad lots from others this way. Our quality control flags any defects pre-ship.

In B2B trade, trust builds on consistency. We've exported to 50+ countries, including heavy users in Germany and Japan. Certifications? ISO 9001, RoHS compliant. No surprises at customs.

This bearing shines in fractional HP motors. Say you're rebuilding spindle assemblies for CNC routers. The compact size fits tight envelopes, while seals protect against chips. We've consulted with US fabricators on volume orders – MOQ as low as 100 for samples.

Cost-wise, expect factory direct at $0.50-$1.20 per unit, volume dependent. Beats distributor markups by 30-40%. Pair with our ball screws or linear guides for full motion kits.

One ops manager shared: swapped to our 6202 2RS after vibrations wrecked a pump. Ran 6 months straight, no issues. Real talk from the floor.

Enough intro. Let's dive into specs.

Detailed Technical Specifications

Here's the data sheet equivalent. Pulled from our production records.

6205 2rs bearing 6203 2rs bearing 6204 2rs bearing

Custom options: C4 clearance, ZZ metal shields, or hybrid ceramic balls for extreme speeds.

Why Choose Our 6202 2RS Bearings? Real Advantages

• Seals hold up in dirty environments. Rubber compounds resist oils and mild chemicals.
• Precision grind ensures quiet operation. Less noise in assembly lines.
• Grease-packed for life – lithium-based NLGI 2, good to 120°C continuous.
• Versatile fit: shafts from 14.98 to 15.01 mm.
• Cost-effective for high-volume. No premium pricing gimmicks.

Compared to open bearings, 2RS cuts contamination risks by sealing paths. We've pulled apart failed units from competitors – grease starved, balls pitted. Ours? Clean inside after years.

Short note on heat: Max 110°C for seals. Exceed it, and rubber hardens. Common in poorly ventilated motors.

Where 6202 2RS Bearings Excel

Electric motors under 1HP. Fans in HVAC. Wheels on material handling carts. Power tool spindles. Even household appliances like washers.

In ag, they handle mower decks. Automotive? Alternators, window regulators. Compact size fits OEM envelopes perfectly.

Warning: Not for heavy axial loads. Use angular contact for that.

Practical Installation Insights

Heat the housing to 80°C for press fit. Never hammer the outer ring. Use an arbor press.

Shaft fit: k5 or m6 tolerance. Align properly – misalignment kills seals fast.

1. Clean shaft and housing.
2. Apply thin grease film.
3. Press in evenly.
4. Run-in at low speed, monitor temp.

Maintenance: Visual check quarterly. Replace if play exceeds 0.1mm radial.

Smart Procurement for 6202 2RS Bearings

Avoid Alibaba traps. Check factory videos, certs. Ask for torque test reports.

Our MOQ: 100 pcs. Samples: 10 pcs free with freight collect.

Risks: Counterfeits with thin races. Test hardness on arrival.

Global Shipping from China to USA

Sea: LCL 15-25 days, $50/cbm. FCL 20ft holds 1M pcs.

Air: DHL 3-5 days, for urgent.

Packing: Vacuum bags, cartons, pallets. Zero damage record.

YIDI Motion Factory Strengths

100 employees, 30% senior techs. German grinders, Japanese auto-lines. 1M pcs/month capacity.

OEM/ODM: Full service. Your logo, custom packs.

Exports to USA, Germany, Japan. Address: 16-1-1601 Aobeigongyuan, Chang'an District, Shijiazhuang, Hebei, China.

What Buyers Say

John M., Procurement Manager, Texas Fabricator
"Switched to YIDI 6202 2RS after SKF delays. Quality matches, price half. Pump rebuilds now last longer."

Maria L., Ops Director, California Distributor
"Fast samples. Seals held in dusty warehouse loaders. Ordering 10k next quarter."

Raj P., Engineer, Midwest OEM
"Precision fits our spindles perfect. No vibrations at 12k RPM. Reliable partner."

Buyer FAQs

What's the difference between 6202 2RS and 6202 ZZ?

2RS has rubber seals (flexible, quieter), ZZ metal shields (higher temp, faster speeds).

Can I get stainless steel?

Yes, for corrosive apps. Lead time +2 weeks.

Lead time for 10,000 pcs?

3-4 weeks production + shipping.

Do you offer free samples?

Yes, 5-10 pcs. Pay freight.

Compatible with NSK/SKF?

Interchangeable dimensions and loads.

Ready for 6202 2RS Bearings?

Phone: +86 18134111662 | Email: adam@yidimotion.com

Visit: Contact Form