6002 Bearing: Precision Deep Groove Ball Bearings for Demanding Machinery
Sourcing reliable 6002 bearings wholesale? We supply high-volume OEM runs from our Hebei factory, with exports to USA, Europe, and beyond. Get factory-direct pricing today.
Table of Contents
Understanding the 6002 Bearing: A Procurement Essential
Procurement teams know the drill. You're midway through a production run, and a spindle starts whining. Vibration creeps in. Downtime looms. Turns out, it's the 6002 bearing—that unassuming 15x32x9mm deep groove workhorse—finally giving out under constant load.
We've seen it across industries. From electric motors in HVAC units to conveyor systems in warehouses, the 6002 bearing handles radial loads like few others. It's not flashy. But it's precise. And when sourced right, it lasts seasons longer than bargain-bin imports.
At YIDI Motion, part of Hebei Yidi Import and Export Trading Co., Ltd., we don't just stock 6002 bearings. We produce them. Established in 2020, our factory in Shijiazhuang cranks out these bearings using German and Japanese CNC grinders for tolerances down to microns. Senior techs—over 30% of our 100-person team—oversee every batch.
Why does this matter to you? Simple. Off-spec bearings kill margins. A 6002 that's even slightly out of round leads to premature wear on shafts, seals, or worse, the whole assembly. We've shipped to 50+ countries, including heavy users in the US and Germany. No surprises there.
Let's break it down operationally. The 6002 designation follows standard metric sizing: bore 15mm, outer diameter 32mm, width 9mm. It's a single-row deep groove ball bearing, often in GCr15 chrome steel. Dynamic load rating around 5.6kN. Static up to 2.8kN. Speeds? Up to 19,000 RPM open, 17,000 shielded.
Buyers from operations teams reach out because they need consistency. Not every supplier delivers. We've had importers cancel orders from competitors after radial play exceeded P0 standards. Ours? Always ABEC-1 or better, per ISO 492.
Consider your workflow. You're quoting a project for automated machinery. Lead times matter. We quote 6002 bearings in 24 hours, ship in 7-15 days via sea or air. Container loads? We optimize: 50,000 units per 20ft FCL, palletized for forklift handling.
One US distributor shared this: swapped our 6002s into their stepper motors. Noise dropped 20%. No hard data—just field observation. But it stuck.
Procurement risks? Plenty. Counterfeits flood Alibaba. Misgraded steel fatigues early. We mitigate with full traceability: heat numbers etched, RoHS compliant, REACH registered. Test reports on request.
This isn't hype. It's what export managers like me deal with daily. Adam Li here, handling outbound to North America. I've walked factory floors, debugged press fits gone wrong. When you inquire, you get straight talk—not sales fluff.
Deeper into specs later. But first, market shifts. Bearings aren't static. Automation boom means higher RPM demands. Electric vehicle pivot? More compact loads like the 6002. Supply chains? Post-pandemic, buyers want China factories with proven export track records. We fit.
Enough intro. You've got budgets to hit. Let's dive into why the 6002 bearing fits your next RFQ.
Market Trends Driving Demand for 6002 Bearings
Automation warehouses are exploding. Think Amazon-scale ops. Those high-speed sorters? Loaded with 6002 bearings in idlers and pulleys. Radial loads from belts, moderate speeds—perfect match.
EV shift hits motors. Compact stators need precise bores. 6002s slot in, handling 10,000+ RPM without grease starvation.
Supply pinch? Steel prices up 15% last year. But volume buyers lock in via OEM deals. We negotiate billet costs quarterly. Your landed price stays flat.
US importers note: tariffs bite, but Section 301 exclusions for machinery parts help. We handle paperwork—your compliance guy sleeps better.
What Sets Our 6002 Bearings Apart
Chrome steel isn't equal. Ours? High-carbon GCr15, vacuum degassed. Hardness 58-62 HRC post-heat treat. Races ground on profile grinders—no flat spots.
Balls? Separated, polished to grade 10 sphericity. Cages stamped steel or polyamide for quieter runs.
Options: open, ZZ shields, 2RS seals. Seals use NBR, good to 120°C. Grease? Lithium complex, NLGI 2.
- Low friction torque—cuts energy draw in fans.
- Corrosion resistance via phosphate coating.
- Noise under 3dB at 10k RPM.
- Priced 20-30% below SKF/TIMKEN equivalents.
Proc tip: for dusty sites, go 2RS. Seals add drag but save rebuilds.
6002 Bearing Technical Specifications
| Parameter | Value |
|---|---|
| Bore Diameter (d) | 15 mm |
| Outer Diameter (D) | 32 mm |
| Width (B) | 9 mm |
| Dynamic Load (Cr) | 5.60 kN |
| Static Load (Cor) | 2.80 kN |
| Max Speed (Grease) | 17,000 RPM |
| Weight | 0.030 kg |
| Material | GCr15 Chrome Steel |
| Tolerance | P0 / ABEC-1 |
6006 bearing 6008 bearing 6007 bearing
Custom tolerances available: P6/P5 on request for high-precision apps.
Where 6002 Bearings Excel in the Field
Electric motors. Half our volume. From 1/4HP pumps to treadmill drives. Fits snug on 15mm shafts.
Conveyors. Idler rollers take belt tension. Our ZZ shields keep grease in, dust out.
Fitness gear. Bikes, ellipticals. Quiet operation sells units.
HVAC fans. Axial loads minimal; speed high.
Office machines. Printers, copiers—precision matters.
Warning: avoid thrust-heavy apps. Go 6002-2RS1 for light misalignment.
Practical Installation and Maintenance Insights
Press fitting? Heat outer to 80°C max. Use arbor press, not hammer. Misalignment warps races.
Shaft tolerance: h6. Housing H7. Measure runout under 0.01mm.
Grease at install: thin layer. Run-in at 50% speed first hour.
Maintenance: check play yearly. Torque guards to 2Nm.
Common fail: over-greasing. Purges seals, attracts dirt.
- Temp range: -30°C to 120°C.
- Vibe tolerance: ISO 15243 class 3.
- Lifecycle: 20,000 hours L10 typical.
Logistics: From Factory to Your Dock
FOB Tianjin. 7 days air to LAX. 25 days sea to LA.
Packing: vacuum bags, then cartons. Pallets shrink-wrapped.
MOQ: 100pcs trial. 10k+ for best rate.
Incoterms: FOB/CIF/DDP. We clear customs.
Track via 17TRACK. Duties? HS 8482.10. Flat rate most US states.
YIDI Motion: Your OEM Partner for Bearings
100 employees. 30% seniors. German Hermle 5-axis for races. Japanese Okuma lathes for balls.
ISO 9001:2015. RoHS. CE marked.
OEM/ODM: custom logos, packaging. Private label for distributors.
Exports: USA 25%, EU 30%, Asia 20%.
Contact: 16-1-1601 Aobeigongyuan, Chang'an District, Shijiazhuang, Hebei, China.
Frequently Asked Questions from Buyers
What’s the lead time for 10,000 6002 bearings?
7-10 days production + shipping. Rush: 5 days air.
Do you offer samples?
Yes, 10pcs free with freight collect. Test in your setup.
ZZ or 2RS for motors?
ZZ for speed, 2RS for contamination.
Price per unit?
$0.45-0.65 USD FOB, volume dependent. Quote today.
Certifications?
ISO, RoHS, SGS test reports. Full compliance.
Feedback from Procurement Pros
John Reyes, Ops Manager, Texas Machinery Inc.
Switched to YIDI 6002s after SKF delays. Fit perfect, ran quieter. Shipped fast—will reorder 50k next quarter.
Marie Dubois, Buyer, EuroTech Distributors, France
OEM run for fans. Quality matches NSK at half price. Seals held up in humidity tests.
Mike Chen, Supply Chain, US Conveyor Co.
Logistics smooth. No customs hassles. Bearings cut vibe issues on belts.
Sarah Patel, Engineer, Fitness Equip OEM, Canada
Samples spot-on. Lifecycle beat expectations. Good for high-volume.
Ready to Source Your 6002 Bearings?
Factory-direct. Risk-free trial. Global shipping.
Or visit Contact Us
Written by Adam Li, Export Director, YIDI Motion
20+ years in bearing exports. Factory floor to boardroom.
HEBEI YIDI IMPORT AND EXPORT TRADING CO.,LTD. | Shijiazhuang, China | 2026
